Graco Reactor E-10, Инструкция-перечень запасных частей

Страница: 21 / 60

Pause (Heated Units)
313221A 21
Pause (Heated Units)
6.
Disengage piston safety lock.
7.
Test spray onto cardboard or plastic
sheet. Verify that material fully cures in
the required length of time, and is the
correct color. Adjust pressure and tem-
perature to get desired results. Equip-
ment is ready to spray.
To bring the hose and gun back to spray
temperature after a brief break, use the fol-
lowing procedure.
1.
Engage piston safety lock.
2.
Set function knob to Slow Recirc .
Fusion
Fusion
3.
Set Recirc/Spray valves to Recirc until
temperature readouts come back up.
4.
If you stop spraying for more than 2 min-
utes when using an impingement mix
gun, close gun fluid valves A and B.
Doing this will keep the internal parts of
the gun cleaner and prevent crossover.