Graco PRO AA4000, Инструкция по эксплуатации

Страница: 23 / 32

REPAIR KITS
Repair Kits must be purchased separately.
Use only GENUINE GRACO PARTS AND ACCESSORIES.
WARNING
When servicing use only genuine Graco replacement parts.
Use of other parts or any modification of the gun could alter
the grounding continuity of the gun or cause parts to rupture
and result in serious injury, fire, explosion, electrostatic
shock, or property damage.
NOTE: The Ref. Nos. shown in the kits below correspond to the reference numbers used in the parts list on page 25. For
the best results, use all the parts in the kit, even if the old parts still look good.
High Air Flow Restrictor Kit 220–493
Use with standard air cap 223–167. Includes:
Ref
No.
Part No. Description Qty
100 179–994 RESTRICTOR 2
101 107–414 SPRING, compression 2
102 100–172 BALL; 3/16” diameter 2
Low Air Flow Restrictor Kit 223–830*
Includes:
Ref
No.
Part No. Description Qty
100 180–763 RESTRICTOR 2
101 107–414 SPRING, compression 2
102 100–172 BALL; 3/16” diameter 2
*MUST also order Air Cap 220–535.
100
101
102
Optional Air Cap 220–535
MUST be used with Low Air Flow Restrictor Kit
223–830, at left. Must order separately.
Spray Gun Repair Kit 218–752
Includes:
Ref
No.
Part No. Description Qty
1b 107–106 O–RING, buna–N 2
2 107–107 REGULATOR, disc 1
3a 106–555 O–RING, fluorocarbon 1
3c 177–156 O–RING, Viton 1
4 179–387 GASKET, housing 1
13a 183–459 WASHER, non-metallic 1
20a 164–769 WASHER, PTFE 2
37 103–648 O-RING, Viton 2
46 103–557 O-RING, Viton 1
53 106–901 O-RING, PTFE 1
56 103–338 O-RING, Viton 1
MANUAL CHANGE SUMMARY
The manual was changed from Rev. P to Rev. R to delete
spray tip 219–407 from the SPRAY TIP SELECTION
CHART.