Installation
309572M
11
e. Re-torque all four setscrews to 60 in-lbs
(6.78 N•m).
f.
Insert cap plugs over setscrews. See
F
g. Wrap connector and wire on each side
of connector in black electrical tape to
help seal out moisture. Ensure 1 in.
(25.4 mm) of wire on each side of con-
nector is wrapped.
6. Connect cables (F). Slide insulator sleeves
over connection. Leave slack (G) in cables
as stress relief to prevent cable failure.
7. Repeat for additional hoses.
8. See Connect 261669 FTS and Heated
Dual Whip Hose, page 12, or Connect
261670 FTS, page 13.
When torqued to 60 in-lbs (6.78 N•m)
setscrews will be approximately flush
with connector. See F
F
IG
. 9
Cap plugs
Setscrews
TI9771A
F
IG
. 10
TI2683B
F
G
Содержание Power-Lock
Страница 22: ...Parts 22 309572M...