background image

Warnings 

6

309572M

Warnings

Warning

Skin Injection Hazard
High-pressure fluid from gun, hose leaks, or ruptured components will pierce skin. This may 
look like just a cut, but it is a serious injury that can result in amputation. Get immediate surgi-
cal treatment.

Do not point the gun at anyone or at any part of the body.

Do not put your hand or fingers over the gun fluid nozzle.

Do not stop or deflect leaks with your hand, body, glove, or rag.

Do not “blow back” fluid; this is not an air spray system.

Follow , page 22, when you stop spraying and before cleaning, checking, or servicing equip-
ment. 

Use lowest possible pressure when flushing, priming, or troubleshooting.

Engage spray gun piston safety lock when not spraying.

Tighten all fluid connections before operating the equipment.

Check hoses, tubes, and couplings daily. Replace worn or damaged parts immediately. High 
pressure hose cannot be recoupled; replace the entire hose.

Fire, Explosion, AND ELECTRIC SHOCK Hazard
Solvent and fumes in work area can ignite or explode. To help prevent fire, explosion, and elec-
tric shock:

Use equipment only in well ventilated area.

Eliminate all ignition sources, such as pilot lights, cigarettes and plastic drop cloths (poten-
tial static arc). 

Do not plug or unplug power cords or turn lights on or off when flammable fumes are 
present.

Keep the work area free of debris, including solvent, rags, and gasoline.

Ground equipment and conductive objects. See Grounding in your proportioner manual.

Hold gun firmly to side of grounded pail when triggering into pail.

Use only grounded hoses.

If there is static sparking or you feel a shock, stop operation immediately. Do not use 
equipment until you identify and correct the problem.

Содержание Power-Lock

























Отзывы: