Cleanup
16
3A3240C
Cleanup
Cleaning the sprayer after each use results in
a trouble free start up the next time the
sprayer is used.
Cleaning from a Pail
•
For short term shutdown periods (over-
night to two days) refer to
•
See
page 24 for information on flush-
ing/cleaning fluids and
1.
Perform
2.
Remove spray tip and tip guard assem-
bly from gun and place in waste pail.
3.
Lift suction tube and drain tube from
paint pail. Let paint drain into the pail.
4.
Separate drain tube (smaller) from suc-
tion tube (larger).
5.
Place empty waste and flushing fluid
pails side by side.
6.
Place suction tube in flushing fluid. Use
water for water based paint and mineral
spirits or compatible oil-based flushing
solvent for oil-based paint. Place drain
tube in waste pail.
7.
Turn pressure control knob to the
Prime/Clean setting.
ti25197a
ti277124a
ti27467a
ti27135a