Start Up
10
3A3240C
Start Up
Pressure Relief Procedure
Follow the Pressure Relief
Procedure whenever you see this
symbol.
1.
Turn ON/OFF switch to the
OFF
position.
2.
Engage the trigger lock. Always engage
the trigger lock when sprayer is stopped
to prevent the gun from being triggered
accidentally.
3.
Turn pressure control knob to lowest
setting.
4.
Put drain tube into a waste pail and
place Prime/Spray valve in PRIME
position (drain) to relieve pressure.
This equipment stays pressurized until
pressure is manually relieved. To help
prevent serious injury from pressurized
fluid, such as skin injection or splashed
fluid, follow the
Pressure Relief
Procedure
whenever sprayer is stopped
and before sprayer is cleaned or checked,
and before equipment is serviced.
ti27118a
ti25198a
ti27493a
ti27120a
