Cleanup
3A3240C
19
c.
Turn Prime/Spray valve horizontal
to SPRAY position.
d.
Turn ON/OFF switch to
ON
position.
e.
Continue to hold gun trigger until
you see paint diluted with flushing
fluid starting to come out of gun.
16. While continuing to trigger gun, quickly
move gun to redirect spray into waste
pail. Continue triggering gun into waste
pail until flushing fluid dispensed from
gun is relatively clear.
17. Turn pressure control knob to the low-
est setting.
18. Stop triggering gun. Engage the trigger
lock.
19. Turn Prime/Spray valve down to
PRIME position.
20. Turn ON/OFF switch to
OFF
position.
Cleaning InstaClean
™
Fluid Filter
The InstaClean Fluid Filter prevents particles
from entering paint hose. After each use,
remove and clean it to ensure peak
performance.
1.
Perform
2.
Disconnect airless spray hose (A) from
sprayer.
3.
Unscrew outlet fitting (B).
4.
Remove InstaClean Fluid Filter (C).
5.
Check InstaClean Fluid Filter (C) for
debris. If needed, clean filter with water
or flushing fluid and a soft brush.
a.
Install closed (square) end of
InstaClean Fluid Filter (C) in
sprayer.
b.
Screw outlet fitting (B) into sprayer.
6.
Tighten outlet fitting and reconnect hose
(A) to sprayer. Use two wrench to tighten
securely.
ti27148a
A
B
C
D
ti27151a
ti25196b
ti27120a
C
B
A
tti27179a
ti27122a
