Graco LineDriver ES 25N555, Операция - Ремонт - Запчасти

Страница: 8 / 34

Operation
8 3A6623C
Disable ExactMil Speed Control
• Return Speed Switch to center position.
Enable ECO Mode
ECO Mode can be compared to half-throttle on a gas
powered unit. It is helpful when greater control is
needed, such as loading and unloading, driving in con-
gested areas, and operating on slopes. It also extends
battery life.
• Set Speed Switch to ECO position.
NOTE: ECO Mode limits forward speed to 4 mph and
reverse speed to 2.6 mph.
Disable ECO Mode
• Return Speed Switch to center position.
12V Auxiliary Ports
• 12V auxiliary power ports are provided to power
accessories.
Trailer Loading & Unloading
1. Always keep LineDriver connected to striper or
grinder.
2. Use a level surface to load and unload. Leave suffi-
cient space behind ramps.
3. Use loading ramps sufficiently long and capable of
handling weight of unit and operator.
4. Adjust striper or grinder handlebar to highest posi-
tion. Slide seat back as far as possible.
5. Use right foot to engage Manual Brake. Use left foot
to control speed. Use ECO Mode to limit speed.
6. Slowly drive straight up/down ramps (do not drive at
an angle).
7. Keep a firm grip on handlebars as the ramp is nego-
tiated.
NOTE: Striper or grinder handlebars swing up/down as
the ramp is engaged/disengaged. Keep legs clear.
NOTE: Check Manual Brake clearance to tire and tire
pressure to ensure they are adjusted properly. Refer to
Manual Brake Adjustment or Replacement , page 11.
NOTICE
12V auxiliary ports must be used to power accessories.
Battery damage can result if other means are used to
power accessories.