Maintenance
3A6623C
11
Maintenance
Manual Brake Adjustment or
Replacement
1. Block tires so LineDriver will not move. Release
Manual Brake.
2. Ensure power switch is in OFF position.
3. Inflate tires to operating pressure per tire sidewall.
Remove two bolts securing brake rod.
4. Select a hole pattern that positions the brake rod 1/8
to 1/4 in. from the tire.
5. Install two bolts and secure brake rod. Repeat for
second tire.
NOTE:
Brake rods are not interchangeable from side to
side. Model shown in the graphic above is the right side
version.
Содержание LineDriver ES 25N555
