Assemble mattress base in the highest position for a newborn.
When the baby grows, the mattress support should be lowered
to prevent baby from climbing out. Attach mattress support (E)
to the left panel and right panel (A&B) with four 1/4” x 3/4”
bolts (1) using the Allen key. Be sure the mattress support is
leveled and centered before tightening all bolts. Do not over-
tighten. Check bolts periodically and tighten if necessary.
Insert
two
Wooden Dowel
s
(X) into the top of each f
ro
nt post.
4
Attach the left and right panels (A&B) to back panel (C) using
four 1/4” x 2-1/4” bolts (3) with four barrel nuts. Use Allen key to
tighten bolts.
3
5
Attach front panel (D) to left and right panels(A & B) using
Two of
1/4” x 3-
3
/8”bolts(4) with
2
barrel nuts provided
and Two 1/4" x 2-1/4" bolts (3)
. Tighten bolts with Allen
key.
T
T
A
B
C
3
3
1
A
E
B
C
3
4
3
A
B
D
3
4
T
PAGE
8
