LD Oil Pump Wall Bracket Drum or Tote Mounting System
10
3A1335A
Pump Installation
1.
Thread the bung adapter (1a) (included with pump
(1) into the hole in the center of the wall bracket (4).
Hand tighten the bung adapter securely to the
bracket.
2.
Install the pump (1) through bung adapter (1a).
3.
Secure the pump (1) in place by compressing the
bung adapter gasket screws (1b).
4.
Ground pump. See Grounding instructions, page 4.
NOTE:
All parts: 3a-3d identified in steps 5 - 6 are
included in Suction Hose Kit (3).
See Kit Parts, page
5.
Thread the bung adapter (3a) into the hole in the
drum cover or tote. Hand tighten securely (F
IG
. 6).
6.
Connect swivel fitting (3b) to suction tube (3c) and
then slide suction tube into bung adapter (3a)
installed in drum or tote cover. Connect one end of
suction hose (3d) to pump inlet and the other end to
the swivel fitting (3b).
F
IG
. 5
1
4
1a
1b
F
IG
. 6
3a
3b
3a
3b
3c
3d
Drum Installation
Tote Installation
