Setup
312864B
5
Setup
Install or Update Data Map
NOTE:
The fieldbus connection is temporarily disabled during
the installation or update of a map token.
1.
Ensure system is inactive.
2.
Remove access cover (E).
3.
Insert and press map token (T) firmly into slot.
4.
Press and hold the map upload push button (M) for
three seconds. The red LED (L) will flash twice,
pause, and repeat once after the data map is suc-
cessfully uploaded. This may take up to 10 seconds.
NOTE:
The rotary switch (S) has no function for the CGM.
5.
Remove token (T). Store in a safe place.
6.
Replace access cover (E).
F
IG
. 2
TI12319A
E
F
IG
. 3
L
M
S
T
TI12320A