Graco 26A530, Инструкция по эксплуатации

Страница: 13 / 24

Setup
3A5278B 13
Pump Mode
Shown in Run Pump AB with pumps turned off and turned on.
Shown with pump turned on.
NOTE: Labels 1 and 2 are part of the menu bar and repeat on all screens. If the potlife timer is not visible, refer to the
sprayer manual for instructions on how to enable it.
NOTE: Labels 3 and 4 will repeat on all versions of this run screen.
NOTE: All versions of this screen display the sum of Flow Rate A and Flow Rate B. Some operation modes display A
and B separately. The gateways always provide Flow Rate A and Flow Rate B independently.
F
IG
. 17: Run Pump AB Off (Left) and On (Right)
F
IG
. 18: Pump Mode On
Label
Input to PLC
Description
Units Comments Output from PLC Description
1 Potlife Timer Minutes
Minutes remaining until potlife timer
expires Can be reset to maximum value
using Reset Potlife Timer
2 System in
Weight Mode Integer
0 = Volume mode
1 = Weight mode
Read Only
7
7
3
4
5
2
1
6