Graco 25M081, Операция

Страница: 15 / 32

Operation
3A5202G 15
Remove Mixer from Cart Stand
1. Follow the Shutdown procedure on page 12, then
perform the Changing Material and Storing
Equipment procedure on page 14.
2. Make sure both frame pins (BA) are in place.
3. Remove the motor:
a. Disconnect the motor power cable (CB).
b. Remove the rear toggle-latch clip (BBA), then
open the rear toggle latch (BB).
c. Support the motor, then remove the motor
alignment pin clip (CAA), motor alignment pin
washer (CAB), and the motor alignment pin
(CA). Set the motor aside.
4. Disengage both mixing tube toggle latches (FAA)
and remove the mix-head assembly (F).
5. Remove hopper ring pins (G).
6. Remove mixer. Lift the mixer off of the stand.
7. If desired, fold the cart stand for storage
convenience.
a. Remove frame pins (BA).
b. Flip the cart stand upside down and lay on a
level surface.
c. Align cart stand legs and fold together.
8. For assembly, see Assemble Unit , page 7.
Be sure to properly support the mixer with a
two-person lift during removal. Do not suspend
from crane or hoist. The mixer is heavy and can
crush fingers and other body parts.
WLD
%%$
&$$
%$
*
WLD