Pressure Control Disassembly
DISASSEMBLY
WARNING
FLUID INJECTION HAZARD
To reduce the risk of serious injury,
follow the Pressure Relief Procedure
warning whenever you are instructed to
relieve pressure.
1.
Relieve pressure.
2.
See Fig. 1. Disconnect hoses (63) from pressure
control. Inspect hoses for damage and replace if
needed.
Fig. 1
02703
63
3.
See Fig. 2. Working under cart, disconnect
wires (A).
4.
Remove three screws (44) and nuts (45) that
fasten bracket (76) to cart. Save screws and nuts
for later use.
5.
Remove old control from sprayer.
Fig. 2
02700
A
76
44,45
6.
See Fig. 3. Disconnect hoses from filter
assembly (18)
18a
18
54
62
55
56
60
Ref 51
Ref 63
55
18b
57
7434A
Fig. 3
7.
Disconnect bypass tube (51) from pressure drain
valve (60).
8.
Remove filter assembly (18) from cart frame by
removing two screws (54). Save screws for later
use.
9.
Remove pressure drain valve (60) from filter
assembly (18).
