308620
20
Pressure Transducer
WARNING
INJECTION HAZARD
To reduce the risk of serious injury,
whenever you are instructed to relieve
pressure, follow the
Pressure Relief
Procedure
on page 12.
NOTE:
See Fig. 9 for this procedure.
1.
Remove the displacement pump. See page 31.
2.
Use a pull–twist motion to remove the transducer
(22) from the pump manifold.
3.
Clean paint residue from the hole in the manifold;
do not scratch the surface of the hole.
4.
Lightly apply oil to the o-ring of the new transducer.
5.
Install the transducer in the pump manifold, while
guiding the o-ring and backup ring into place.
6.
Align the holes in the transducer as shown by the
arrows in Fig. 9.
7.
Install the displacement pump. See page 32.
Fig. 9
22
05835A
