Graco 17G589, Операция, Запчасти

Страница: 15 / 26

Cleanup
3A3111 A 15
Cleanup
For additional information refer to Operation manu-
al (333388).
• Perform the Flushing Procedure , page 13
• Open dump valves on resin and Catalyst (BPO) (C
& D)
• Vent the resin and Catalyst (BPO) pressure pots
• Vent the air receiver to release any water
• End of day complete
Flush the Equipment
• Flush before changing colors, before fluid can dry in
the equipment, at the end of the day, before storing,
and before repairing equipment.
• Flush at the lowest pressure possible. Check con-
nectors for leaks and tighten as necessary.
• Flush with a fluid that is compatible with the fluid
being dispensed and the equipment wetted parts.
1. Perform the Flushing Procedure , page 13.
2. Follow Pressure Relief Procedure , page 8.
3. Remove spray tip and soak in solvent.
4. Place siphon tube in grounded metal pail containing
cleaning fluid.
5. Set pump to lowest possible fluid pressure, and start
pump.
6. Hold a metal part of the gun firmly to a grounded
metal pail. Trigger the gun until clean solvent dis-
penses.
7. Remove gun from hose. See gun manual to further
clean gun.
8. Follow Pressure Relief Procedure , page 8, and
Remove fluid filter and soak in solvent. Replace fil-
ter cap.
9. Open dump valves on resin and Catalyst (BPO) (C
& D)
10. Vent the resin and Catalyst (BPO) pressure pots
11. Vent the air receiver to release any water
To avoid fire and explosion:
•
Flush equipment only in a well-ventilated area
• Always ground equipment and waste container.
• To avoid static sparking and injury from splashing,
always flush at the lowest possible pressure.
NOTICE
Flushing: Flush BPO system with soapy water remove
water to avoid freeing. Dispose of used BPO per man-
ufacturers recommendations.
Operating temperatures: Only use BPO at tempera-
tures between 32–110°F (0–43°C). Never heat BPO
for any reason.
Shelf life: Use only within the manufacturers recom-
mended shelf life. Discolored (yellowish), clumpy or
dries BPO is often out of date or contaminated. Store
BPO in a cool location.