Graco 127643, Инструкция по эксплуатации

Страница: 3 / 56

M0309 3
EN
B MACHINE AND MANUFACTURER IDENTIFICATION
DATE CODE PART NUMBER
TECHNICAL
DATA
127643 XXXX
MAX WPR 345 kPa (3.4 bar)(50 psi)
12V D
C 260 W
22A 2600 Rpm
DUTY CYCLE 20´ON/20´OFF
36 lpm/9.5 gpm
-5C to 40C 23F to 104F
IP55/RAINPROOF
LOT XXXXXXX
Read instruction manual 333466.
Artwork No. 294247 Rev. B
Graco Inc.
P.O. Box 1441
Mpls, MN 55440
www.graco.com
MADE IN ITALY
F 14 A
C MACHINE DESCRIPTION
PUMP: Five-chamber positive-displacement diaphragm pump.
MOTOR: Asynchronous motor, single-phase, 2 pole, closed type, protection class IP55 according to CEI-EN 60034-5.
C.1 HANDLING AND TRANSPORT
Due to the limited weight and dimensions of the pumps, special lifting equipment is not required to handle them. The
pumps are carefully packed before dispatch. Check the packing when receiving the material and store in a dry place.
D
GENERAL WARNINGS
Important pre-
cautions
To ensure operator safety and to protect the pump from
potential damage, workers must be fully acquainted with
this instruction manual before performing any operation.
Symbols used
in the manual
The following symbols will be used throughout the manual
to highlight safety information and precautions of particular
importance:
WARNING
This symbol indicates safe working practices for
operators and/or potentially exposed persons.
NOTICE
This symbol indicates that there is risk of damage to
the equipment and/or its components.
NOTE
This symbol indicates useful information
Manual preser-
vation
This manual should be complete and legible throughout.
It should remain available to end users and specialist
installation and maintenance technicians for consultation at
any time.
Reproduction
rights
All reproduction rights are reserved by Graco Inc. The text
cannot be reprinted without the written permission
E FIRST AID RULES
Contact with
the flui
In the event of problems developing following EYE/
SKIN CONTACT, INHALATION or INGESTION of the treated
product, please refer to the SAFETY DATA SHEET/ASU32 /
DEF / AD-Blue (ISO22241)
Persons who
have suffe ed
electric shock
Disconnect the power source, or use a dry insulator to
protect yourself while you move the injured person away
from any electrical conductor. Avoid touching the injured
person with your bare hands until he is far away from any
conductor. Immediately call for help from qualified and
trained personnel. Do not operate switches with wet hands.
NOTE Please refer to the safety data sheet for the fluid