18
1-1/4" Fender Washer
1/4" Plastic Knob
1/4" Flat Washer
1/4" Nylock Nut
1/4" X 45mm
Connector Bolt
1/4" Rectangle Nut
Middle Leg "A"
Middle Leg "B"
• On the other bolt you will put a fender washer and then a plastic knob.
• The right side is just opposite of the above instructions. The illustration on the previous page will help.
• Lay the Little Graice on it’s side with the front
down, as illustrated.
• Put the “B” side of your Middle Leg on the bolts,
which are on the front of your frame.
• The bolt to the right of the “B” is where you will
put a flat washer followed by a nylock nut.
• On the other bolt you will put a fender washer
and then a plastic knob.
• You will have to push the “A” Side down enough to get it on the bolts on the back side of your frame.
• The right side is just opposite of the above instructions. The illustration on the previous page will help.
Step 14: Middle Leg Assembly
Parts Needed: 1 or 2*- “A” Middle Leg
1 or 2*- “B” Middle Leg
1 or 2*- Middle Leg Brace
2 or 4*- 1/4 X 45mm Connector Bolt
2 or 4*- 1/4 Rectangle Nut (threaded)
* Queen set up ONLY
• Connect the “A” and “B” Middle legs by placing the
connector bolts through each leg hole as pictured, and into
the Middle Leg Brace.
• Place a rectangle nut in the Middle Leg Brace so the
connector bolt can be screwed into the nut tight.
• NOTE if you are setting up for queen, you will assembly
two sets of legs.
