manualshive.com logo in svg

Grace Little Gracie II, Руководство пользователя

Поделиться
Скачать
Grace Little Gracie II Скачать руководство пользователя страница 25

25

**You have the option of  having the handles on the Left or Right side.  You will want to decide the side you want 

them on before you get started on the rest of the steps.**

•  Slide a 1/4” washer on the end of  a bolt and then thread the bolt through the hole that is the farthest away from 

the end of  the Front Lever, as shown above.

•  On then end of  the bolt you will put another 1/4” washer and slide the bolt through the hole on the Front Right 

or Left Handle.

•  Once the bolt is through the Handle you will put a 3/16” flat washer and then a 1/4” nylock nut on the end of  

the bolt.  **Make sure nylock nuts are loose enough to allow the washer to turn in your fingers.**

•  On your Middle Lever you will place a bolt, which has 1/4” washer on the end, through the middle hole above 

the bottom cut out part of  your Middle Lever.

•  On the end of  the bolt sticking out of  your Middle Lever you will place a 1/4” washer and then slide the bolt 

through the hump on top of  the Handle.

•  Place a 3/16” washer on the end of  the bolt and then screw a nylock nut on the end.  **Make sure nylock nuts 

are loose enough to allow the washer to turn in your fingers.**
•  On your Right or Back Lever you will place a bolt, which has 1/4” washer on the end, through the hole on the 

longer side, as shown on the previous page.

•  On the end of  the bolt sticking out of  your Back Lever you will place a 1/4” washer and then slide the bolt 

through the hole on the back of  your Handle.  Place a 3/16” washer on the end of  the bolt and then screw a nylock 

nut on the end.  **Make sure nylock nuts are loose enough to allow the washer to turn in your fingers.**

Step 23:  Lever Linkage to Handle Assembly

Parts Needed:  1- Front Lever Linkage

 

 

1- Back Lever Linkage

 

 

2- 1/4” x 35mm Connector Bolt

 

 

2- 1/4” x 40mm Connector Bolt

 

 

8- 1/4” Flat Washer

 

 

4- 3/16” Flat Washer

 

 

4- 1/4” Nylock Nut

•  On the end of  a 40mm connector bolt you will want to put a 1/4” washer and then thread the bolt through one 

end of  the Front Lever Linkage.

•  On the end of  the bolt sticking out of  your Front Lever Linkage you will place a 1/4” washer and then slide the 

bolt through the hole on your Front Lever.  Place a 3/16” washer on the end of  the bolt and then screw a nylock 

nut on the end.  **Make sure nylock nuts are loose enough to allow the washer to turn in your fingers.**

•  On the end of  a 35mm connector bolt you will want to put a 1/4” washer and then thread the bolt through the 

cut out part of  the Middle Lever.

Содержание Little Gracie II





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды