GPX 250r TSE, Руководство по обслуживанию

Страница: 48 / 104

GPX MOTO
- 41 - www.GPXMOTO.com + www.GPXMOTOUK.com
CHECK AND CLEAN THE CHAIN
Checking the condition of the chain:
1. Observe the chain from the rear of the vehicle to
check whether the chain is skewed as a whole
2. Rotate the rear wheel by hand and observe whether
the rotation of the rear wheel is easy and the chain
movement is smooth
3. Carefully check the gap between the chain links to
ensure there is no dirt and that it is well lubricated.
Clean the Chain:
Use a special cleaning detergent to wash the chain
links. Wait until the chain is naturally air-dried, and
then apply a layer of chain oil to the surface of the
chain using a spray can, a brush or a pump can.
REMOVING OR INSTALLING THE CHAIN
Removing the Chain:
1. Remove the chain split link on the chain.
2. Remove the movable section of the chain.
3. Pull out the chain from the sprocket.
Installing Steps:
The instalment should be carried out in the reverse
order of removal.
The chain adjustment should be checked afterwards.