GPX MOTO GPX 450R FSE, Руководство пользователя

Страница: 35 / 58

GPX MOTO
- 42 - www.GPXMOTO.com + www.GPXMOTOUK.com
CHECK AND ADJUST THE CHAIN TENSION
The chain transfers the power output from the engine to
the wheels. It is therefore important that the chain is in
good condition , is well lubricated and works correctly.
It is an important part of the motorcycle. The chain
needs frequent inspection and maintenance to ensure its
normal use.
The chain tension can be adjusted according to
requirements, the steps are as follows:
1. Stand the motorcycle with rear wheel suspended.
2. In accordance with the guide photo and at the rear
of the chain guide , pull the chain upwards so that
it is taut. The distance between the chain and the
swinging arm should be 50 - 60mm.
3. Be aware that sometimes the chain may become
slightly more loose and slightly more tight as you
spin the wheel. You must find a compromise, so
that the average measurement is 50-60mm.
4. If the chain does not match this measurement please
adjust the chain.
5. Loosen the rear axle nut (A)
6. Loosen the locking nut (B) on both sides of the
swinging arm.
7. By using the notches on the swinging arm as a
guide , adjust bolt ( C ) to symmetrical and equal
settings on both sides of the swinging arm.
8. Tighten the chain to the correct chain tension.
9. Tighten the rear axle nut.
10. Check the chain tension again and re-adjust if
necessary.