GPX MOTO GPX 450R FSE, Руководство пользователя

Страница: 21 / 58

GPX MOTO
www.GPXMOTO.com + www.GPXMOTOUK.com
- 28 -
The measurement procedure is as below:
1. Place your motorcycle on its centre stand so that it is
stable.
2. Select a fixed point on the side of the rear fender and
mark it as "point 1".
3. Measure the distance from "Point 1" to the centre of
the rear axle and record it as "A1".
4. Remove the motorcycle from the rack
MEASURE DISTANCE BETWEEN CENTER OF REAR WHEEL AND REAR FENDER
UNDER NO LOAD
The measurement procedure is as follows:
1. The motorcycle is up right so that the centre surface
of the tire is perpendicular to the ground
2. Measure the distance from the centre of the rear
wheel axle of the motorcycle to "point 1" and record it
as "A2".
3. Use a single stand to support the vehicle
4. Calculate the difference between "A1" and "A2" and
denote it as "D1".
The value of "D1" when GPX motorcycle leaves
factory is shown below
D1
GPX450R FSE 10
～
34mm