GPX MOTO
- 39 - www.GPXMOTO.com + www.GPXMOTOUK.com
Removing steps as below:
1. Undo the clamp bolt joining the front to the rear
exhaust.
2. Remove the rear silencer by removing the twp bolts
as indicated.
3. Remove the rear silencer by pulling backwards
firmly.
4. Unplug the front exhaust sensor
5. Undo and remove the 2 bolts that secure the front
exhaust to the cylinder head.
6. Remove the one bolt that attaches the front pipe to
the chassis.
7. Remove the front exhaust from the motorcycle.
REMOVING OR INSTALLING THE FRONT EXHAUST PIPE
Installation Steps:
The instalment should be carried out in the reverse
order of removal.The exhaust pipe and the silencer can
guide the gas emission and reduce the noise.
If the exhaust pipe is rusty or ruptured or damaged by
impact, please replace it with a new one immediately. If
the noise is too high or the engine performance is
degraded, replace the muffler tube or repack the
silencer tube with specialist wadding.
For the cleaning of the exhaust system, please consult
with GPX dealers before operating.
If you need to replace the muffler packing or tube,
please follow the steps below:
Unscrew the 2 mounting bolts of the silencer.
Unscrew the fixing bolts of the silencer.
Loosen the buckle at the connection between the
silencer and the exhaust pipe
Pull out the silencer backwards
Drill to remove the rivets securing the steel front and
rear caps to the silencer.
Pull the caps away and remove the inner tube.
Remove the old wadding/packing
Firmly wrap the inner tube in new wadding.
Insert the inner tube into the silencer and replace the
end caps
Rivet the end caps onto the central alloy pipe.
Replace the silencer and install the fasteners
Installing Steps:
The instalment should be carried out in the reverse
order of removal.
Содержание GPX 450R FSE
Страница 11: ...GPX MOTO www GPXMOTO com www GPXMOTOUK com 11...
