GPX MOTO GPX 450R FSE, Руководство пользователя

Страница: 24 / 58

GPX MOTO
- 31 - www.GPXMOTO.com + www.GPXMOTOUK.com
The handlebars of the vehicle can be adjusted
according to the customer’s driving habits. The specific
steps are as follows:
1. Remove the handlebar cover and handlebar pad on
the handlebar.
2. Loosen the bolts securing the upper handlebar
clamp so that the handlebar can be turned.
3. Sit on the whole vehicle and hold the handlebar to
the position where both hands are placed naturally.
4. Tighten the bolts of the upper handlebar clamp to the
correct torque setting.
5. Observe the position of the handlebar, if not
satisfied, repeat the above process.
6. Refit the handlebar cover and pad.
VEHICLE MAINTENANCE
PLACEMENT
Raise you motorcycle on its centre stand always when
carrying out the related maintenance.
It is helpful to remove or install various parts.
REMOVING OR INSTALLING THE DISC BRAKE COVER
Removing steps are as follows:
1. Turn the front wheel to the straight ahead position.
2. Use an allen key to remove the 3 mounting screws.
3. Remove the disc brake cover.
Installing steps:
The instalment should be carried out in the reverse
order of removal.
REMOVING OR INSTALLING THE FRONT FORK PROTECTION GUARDS