Verification of Operation
Verify the FC-3 and wiring are secure and wired for the correct voltage. Restore power to the HVAC equipment. The
green indicator light on the FC-3 will illuminate. The BAS alarm contacts will close. To verify output, take a non-contact
voltage reader and place it near the ion emitters it should indicate voltage.
Maintenance
CAUTION:
MAKE SURE POWER IS DICONNECTED BEFORE SERVICING
The FC-3 requires very little maintenance. Over time particles will accumulate on the ion emitters and they will need to
be cleaned periodically. In most applications annual cleaning will suffice.
1. Turn power to the FC-3 off
2. Gently brush the ion emitters with a nylon brush (toothbrush will work)
3. Restore power to the FC-3
Figure 7: Example assembly with twist-on wire connectors.
Figure 6: Example assembly with crimp connectors.
!
