For technical product queries, please reach out to [email protected]
The GPS FC-3 is an air ionization system designed to be mounted inside of fan coils, heat pumps, ductless mini splits,
and air handlers up to 3,200 CFM or 8 tons. There are Build Automation System (BAS) alarm contacts provided (orange
wires) with the FC-3.
Hardware Provided by GPS
• FC-3 unit
• Fuse
Additional Hardware Provided by GPS with FC-3T model
• Power supply APV-12-24 (required for installations on voltages higher
than 24VAC)
Hardware Required by Installer
• Mounting screws
• Electrical connectors - Twist-on wire connectors or comp connectors
• Double sided tape
INSTALLATION LOCATION
GPS recommends the FC-3 be installed downstream from the filter blower and coil.
CAUTION:
MAKE SURE POWER IS DISCONNECTED TO THE HVAC EQUIPMENT BEFORE INSTALLATION
!
Figure 1
Figure 2
