www.gpsinsight.com
|
866.GPS.4321
|
Page 9
Connecting to the Diagnostic Link Connector Port
1. With the vehicle’s engine OFF, unscrew the DLC
port from its position under the dashboard*. In
most cases, the DLC port is located under the
dashboard on the left side of the steering wheel,
facing toward the floorboard.
2. Plug the Bypass Connector of the harness into the
DLC port that was previously removed from
the vehicle in step 1. For the 9-pin connector, turn
the rotating cap clockwise to lock into place.
3. Mount the Core Connector of the harness into the
place in which the DLC port originally resided.
*Note: DLC Port Connector may also be located near or behind the driver seat.
3500 Unit
Dashboard
Core Connector
Bypass Connector
Original OBD-II Port
To Vehicle
To complete installation proceed to page 13
