www.gpsinsight.com
|
866.GPS.4321
|
Page 6
Adapter
Retainer Bar
OBD-II
Replacement
Connector
Core Connector
3500 Unit
Data Port
Harness Connector
Yellow Zip Tie
Details on page 17
Bypass
Connector
Installation Tip:
Please note that the key on the Harness Connector of the Harness Flat Cable must
be facing toward the top of the 3500 device to properly connect.
Connecting the Harness and Unit
1. Core Connector Assembly
1. Snap the selected plastic adapter to the back of
the Core Connector.
2. Attach the Core Connector to the OBD-II
Replacement Connector.
3. Use a Retainer Bar to secure the Core
Connector.
2. Data Port Connection
1. Connect the Harness Connector to the
Data Port Interface.
2. Use a yellow zip tie to secure the connection.
