5
www.gpodisplay.com
NEX-series Video wall
To ensure safety, please read this manual carefully before installation and follow the instructions
herein. Store this installation guide in a secure place for future reference.
• The video wall must be installed on a flat and level surface which is strong enough to bear its weight.
• Make sure mounting brackets are tightened and secured on the wall
• The Liquid Crystal Display (LCD) panel of the display has a very thin protective layer of coating
which is susceptible to marking or scratching and cracking if struck or pressured. Please cover and
protect the displays if there is construction or other work being conducted at the installation site.
• Transport and handle displays by holding the handles on the back of the display. Do not touch the
LCD panel surface directly to avoid possible scratches and backlight leakage
•
Leave a slight (>0.5mm) gap between displays in order to protect your LCD screens from the damage
through the direct transfer of weight. See Checking the safe distance between displays on page 6 for
details.
Notes on handling/transporting displays:
LCD video wall monitors have limited mechanical strength. To prevent the display from performance
failure caused by line defects, front bezel bending, glass scratch/broken, light leakage, etc.,
handle with care.
• At least two (2) adults are required to move & carry displays.
• Retain the original shipping box and packaging in storage for use in the future, when you may need
to transport the product.
• When placing the display face (panel side) down:
- Prepare a flat, level, horizontal surface that is larger than the display and spread a thick protective
sheet/foam on it. (Fig. 1) – Lay the display down gently and horizontally.
• When you want to place the display in an upright position:
- Lift the display up horizontally by holding the two (2) handles at the top/rear with one hand per
person and supporting the bottom bezel with the remaining hand. Do not allow the display to
rest/put weight on bezel edges and corners
- Be careful not to scratch any parts of the display when placing the display upright. (Fig. 3)
- Stand the display vertically to make sure the its weight spread evenly throughout the bottom bezel.
* Do not rest on corners or lean forward/back. (Fig.4)
Handling Precautions
[Fig. 1]
[Fig. 2]
[Fig. 3]
[Fig. 4]
