32
DATA IN MAIN MENU “FLOW 1”
PARAMETER DESIGNATION
Specifies the signal quality in [%]
Outputs the actual temperature
of the connected QMF-PT100
temperature sensors. Signals the
measurement status
Indicates the status of the
measurement
Indicates deactivated data logging
Indicates ongoing data logging
Indicates USB-connection to PC
RESET
TOT
Resets the Totalizer (flowrate counter) to zero
DIAG
Change to the diagnostics windows. Only neces-
sary for information or if you do not receive any
measurement results
FLOW 2
Change to measuring window “Flow 2” providing
further information
OSC
Change to oscilloscope menu to watch signals
MEASURING WINDOW “FLOW 2”
How to open the central measuring window “Flow 2.”
Starting in the primary measuring window “Flow 1”:
Select “Flow 2.”
Flow measuring window 2 provides concise information
that is important for flow measurements (without heat
measurement). The window also provides additional
flow velocity data.
ADDITIONAL CONTENT OF MENU “FLOW 2”
FUNCTION
DESIGNATION
Displays the actual flow
velocity
FLOW 1
Change to the primary measuring window”
“Flow 1”.
HEAT
Change to measuring window “Heat”
MEASURING WINDOW “HEAT”
Starting in the primary measuring window “Flow 1: Select
‘Flow 2’ -> Heat”
The “Heat” measuring window outputs concise informa
-
tion that is important for heat measurements.
DATA IN MENU “HEAT”
PARAMETER DESIGNATION
Displays the actual thermal output.
Displays the actual heat quantity.
Displays the differential temperature
between the connected PT100 T1
and PT100 T2 temperature sensors.
FLOW 2
Change to measuring window “Flow 2.”
SELECTING THE PHYSICAL UNITS
How to access the “Units Setup” menu:
In the primary measuring window “Flow 1”:
Select
“SETUP” -> “CMPL SETUP” -> Navigate to “Units Setup”
in the main menu.
Select the variable to change the physical unit: