19
6
7
Enter the thermal
capacity of the fluid:
Enter the density
of the fluid:
Select a suitable ultrasonic transducer:
Select a suitable mounting mode:
i
For information on suitable
transducers for specific
pipe dimensions, refer to
section “QStar UFM and
Components.”
i
For information on suitable
transducers for specific
pipe dimensions, refer to
section “QStar UFM and
Components.”
Output of the distance between the
ultrasonic transducers:
i
The distance between
transducers is specified in
inches and always measured
between the faces of
transducers 1 and 2. These
dimensions are not the same
for each mounting mode.
8
END
USING QUICK SETUP (CONTINUED)