GoVideo TA2050, Руководство пользователя

Страница: 12 / 26

12
Memorizing Channels
Your TV can memorize and store all available channels for both antenna and cable TV. After the channels are
memorized, use the
TV CH+/- buttons to scan through the channels. This eliminates the need to change
channels by entering the channel digits. There are three steps to memorize channels: 1) Select a broadcast
source; 2) Memorize channels; and 3) Add/erase channels.
Œ
Press the MENU button. The OSD MENU will be
displayed.
´
Select Setup using the / buttons and then
press the
√
button.
ˇ
Select Antenna using the / buttons and then
press the
√
button.
¨
Select TV or CATV using the / buttons.
If you are using an antenna, choose TV . If you
are using Cable TV, choose CATV .
Setup
Adjust Previous
Selecting the Broadcast Source
Antenna CATV
Fine tune 0
Add/Erase
√
Favorite CH.
√
LNA Off
Auto program
Before your TV can begin memorizing the available channels, you must specify the type
of signal source that is connected to the TV (i.e., an antenna or a cable system).
Œ
Press the MENU button. The OSD MENU will be
displayed.
´
Select Setup using the / buttons and then
press the
√
button.
ˇ
Select Auto program using the / buttons
and then press the
√
button.
The TV will begin scanning all available channels.
After all available channels have been stored, the
Setup menu reappears.
¨
Press the EXIT button to exit from the menu.
Viewing Saved Channels
Press the / buttons.
- Only saved channels are selected.
- The Auto program function can select channels
using the / buttons only when more than 2
channels have been saved.
Setup
Move Previous
Storing Channels in Memory (Automatic Method)
Antenna CATV
Fine tune 0
Add/Erase √
Favorite CH.
√
LNA Off
Auto program
The TV automatically scans through all available channels and stores them in memory.
This may take a couple of minutes to complete.
Auto programming
C 24
Previous
Œ
Press the MENU button. The OSD MENU will be
displayed.
´
Select Setup using the / buttons and then
press the
√
button.
ˇ
Select Add/Erase using the / buttons and
then press the
√
button.
¨
Adding a channel
Select a channel to add using the / buttons
and then press the
√
button.
The OSD changes from - - - to Add .
ˆ
Deleting a channel
Select a channel to delete using the / buttons
and then press the
√
button.
The OSD changes from Add to - - - .
Channel Memory
Move Adjust Previous
Adding and Erasing Channels (Manual Method)
You can use this function to add channels and to delete unwanted channels after Auto program
is complete.
C 1 ADD
C 2 - - -
C 3 ADD
C 4 ADD
C 5 ADD
MENU
TA2050 UG 2-23-05.qxd 2/23/05 10:05 AM Page 12