EN
28
Before Initial Use
1. The device should be used for the
fi
rst time without any food in it as it may produce
some smoke or odours due to coating residues. Allow the device to heat up on the
highest temperature setting for approx. 15 minutes without any food in it (see the
"Basic Use of the Device" chapter).
2. Thoroughly rinse all accessories. Follow the instructions in the "Cleaning" chapter to
do this.
Basic Use of the Device
PLEASE NOTE!
■
Do not place food that is still packed in plastic wrap or plastic bags in the device.
■
Only ever place down the hot accessories on a heat-resistant surface.
■
Make sure that the food that you would like to prepare does not come into contact
with the heating element of the device.
■
Keep the device clean. Any dirt and contamination could start to burn and possibly
cause faults.
The door (
26
) of the device must be closed for settings to be made and buttons
to be pressed.
After switching o
ff
the device, the fan continues to run for a few seconds to cool
down the device. The
fan symbol (
22
)
fl
ashes.
The device has overheating protection. It switches o
ff
if it is overloaded. In this
case, pull the mains plug out of the plug socket and allow the device to cool down
completely.
1. Place the main unit (
1
) on the kitchen unit or another dry, clean,
fl
at and non-heated
work surface. Ensure that there is su
ffi
cient clear space at all sides.
2. Completely unwind the connecting cable and plug the mains plug into a plug socket.
3. Open the door.
4. Slide the fat collecting tray (
7
) into the bottom of the cooking space (
10
).
5. Select a suitable accessory for the food that is to be prepared (see the “Accessories”
chapter). You can also use a small casserole or baking dish and place it on a baking
rack (
6
).
6. Process the food and place it on / in the accessory.
7. Attach this accessory in the device (see the “Accessories” chapter).
8. Close the door.
9. Press the On / O
ff
button (
19
). The displays on the control panel (
19
) switch on.
185 °C and 15 minutes are preset.
10. Either set the temperature and cooking time manually with the buttons
+ / -
(
17
and
21
) and start the cooking process by pressing the
On / O
ff
button or select one of
the 10 programmes (
16
).
Choose a programme:
Touch the required programme symbol. When it
fl
ashes, the programme is activated
and the device will turn on a few seconds later. As long as the symbol is
fl
ashing, a
04888_Inlay_DE-EN-FR-NL_A5_V1.indb 28
04888_Inlay_DE-EN-FR-NL_A5_V1.indb 28
11.12.2019 15:15:26
11.12.2019 15:15:26
