Goulds Pumps GSP Series, Инструкции по установке, эксплуатации и обслуживанию

Страница: 8 / 28

8
Use care when moving pumps. Lifting equipment must be able to adequately support
the entire assembly. Hoist pump using a suitable sling under the motor adapter and
motor (Figure 1). For larger pumps, motor lifting rings may be used.
III. Product Description
Description
This section provides a general description of the Goulds Model GSP and key
engineering specifications.
Overview
The Goulds model GSP pumps are single stage, end suction, centrifugal pumps designed
to meet the rigorous standards of hygiene needed by the food and beverage industries.
Pumps are used in the food industry as process or clean in place pumps.
The GSP series meets 3A Sanitary Standards for Centrifugal and Positive Rotary Pumps,
Number 02-10 and 3A Sanitary Standard for Machine Leveling Feet and Supports,
Number 88-00 for both internal and external hygienic design. This enables operators
to insure the purity of their process and the cleanliness of their plant to meet both local
and national health and safety regulations. Not all products marked 3A meet these
design and clean-ability standards.
Mechanical seals are FDA approved and several versions of the pump have EHEDG
European sanitary certification.
Pump impellers are fully open, and either threaded or key driven and held in position
by an impeller bolt and o-ring. Impeller hubs are extended through the seal and
backplate eliminating the need for shaft sleeves.
Casings are full volute in design. 316 Stainless parts and welds are polished to
Ra<0.8 um.
Suction and discharge connections are Tri-clamp sanitary flange type.
Close-coupled units have NEMA standard JM motors with C-face mounting and key
driven shaft extension or for smaller pumps, NEMA standard 56J motors with threaded
shafts. Pumps are available with standard ODP or TEFC motors with shrouds and
pump stands or wash down enclosures. These are provided for hygienic cleaning of the
pump and its surroundings.