Mounting and Setup
English, Revision 02, Date: 20.01.2015
20
NOTE!
If several antennas are applied within one installation they have
to be mounted in a
minimum distance of 1500 mm
to one
another to guarantee a smooth production flow
3.3.2
Connection
Connection wires are not part of the scope of supply. Figure 6 on page 9 indicates
which kind of cable construction can be applied. These kind of cables are commer-
cially obtainable at many manufacturers (e. g. Binder 79-3444-32-05 M12 line 2 m
PUR 5 x 025). For pin allocation please refer to Table 1 on page 9.
Accessory parts as an elbow jack with different cable lengths available (standard
2 m).
If a high interference level is excepted shielded wires ought to be used.
3.4
Interface G 06150Y (optional)
The optional interface has to be installed on a mounting bar. It has the following termi-
nal allocations:
Figure 13
Configuration of the interface mounting bar casing
The function is described in 2.3 „Serial/parallel interface HG 06150Y (optional)“ on
page 16.
Connectors of the Mounting Bar Casing
1
Code Bit 1 (low bit)
15
Code Bit 15
2
Code Bit 2
16
Code Bit 16 (most significant
bit)
3
Code Bit 3
17
Data Ready
4
Code Bit 4
18
Data Valid
5
Code Bit 5
19
n. c.
Table 12
Terminal allocation of the interface-mounting bar casing (part 1 of 2)
