1
SECULIFE SP BASE
Gossen Metrawatt GmbH
1
Safety Precautions
Observe this documentation, in particular all included safety information, in order to
protect yourself and others from injury, and to prevent damage to the instrument.
General
• Carefully and completely read and adhere to these operating instructions.
The document can be found at http://www.gossenmetrawatt.com. Retain this
document for future reference.
• Use only the specified accessories (included in delivery or listed as optional) with
the instrument.
• Carefully and completely read and adhere to the product documentation of the
optional accessories. Retain these documents for future reference.
• Observe and comply with all safety regulations which are applicable for your
work environment.
Handling
• The instrument may only be used as long as it’s in good working order.
• Inspect the instrument before use. Pay particular attention to damage, broken
insulation or kinked cables.
• Damaged components must be replaced immediately.
• Accessories and cables may only be used as long as they’re fully intact.
• Inspect all cables and accessories before use. Pay particular attention to dam-
age, broken insulation or kinked cables.
• If the instrument or an accessory doesn’t function flawlessly, remove it from
operation and secure it against inadvertent use.
• If the instrument or accessory is damaged during use, e.g. through falling,
remove it from operation and secure it against inadvertent use.
Operating Conditions
• Do not use the instrument after long periods of storage under unfavorable con-
ditions (e.g. humidity, dust or extreme temperature).
• Do not use the instrument after extraordinary stressing due to transport.
• The instrument must not be exposed to direct sunlight.
• Only use the instrument and the accessories in compliance with the specified
technical data and under the specified conditions (ambient conditions, IP pro-
tection class, measuring category, etc.).
• Do not use the instrument in potentially explosive atmospheres.
• The instrument and the included accessories may only be used for the tests/
measurements described in the instrument‘s documentation.
