manualshive.com logo in svg

Gossen MetraWatt M281A, Руководство по эксплуатации, Страница: 34 / 40

Поделиться
Скачать
Gossen MetraWatt M281A Скачать руководство пользователя страница 34

30

METRACABLE TDR PRO

Gossen Metrawatt GmbH

7

Care and Maintenance

With the exception of the batteries which need to be replaced or recharged from time to 
time, the METRACABLE TDR PRO does not include any components which require mainte-
nance by the user. Battery replacement and care of the instrument and its accessories are 
described below.

7.1

Battery Replacement

Batteries are included with the instrument, which you installed during initial startup 

 con-

densed operating instructions (included with the instrument). If the batteries are depleted 
they have to be replaced. Either conventional or rechargeable batteries can be used, as long 
as they’re comparable with those specified in the technical data (

6).

Attention!

!

Risk of injury due to contact with dangerous voltages.
Only use the instrument when the battery compartment lid is inserted and firmly 
screwed into place.

After replacing the batteries with new conventional or rechargeable batteries, the instrument 
has to be set for use with either conventional or rechargeable batteries.

Required tools: Philips screwdriver

Required replacement parts: 4 conventional or rechargeable batteries (which are compara-
ble with the originally included batteries 

6)

The instrument is switched off.

All measurement cables and accessories have been removed from the instrument.

1. Place the instrument face down on a stable surface.
2. Loosen and remove the 2 screws from the battery compartment lid.
3. Remove the battery compartment lid by pulling it down.
4. Insert 4 conventional or rechargeable batteries into the battery compartment, making 

sure that the plus and minus poles match up with the provided polarity symbols.

Attention!

!

Utilized conventional or rechargeable batteries must be comparable with those speci-
fied in the technical data (

6).

Use either 4 conventional or 4 rechargeable batteries – do not mix the two types.

5. Slide the battery compartment lid onto the battery compartment.
6. Secure the battery compartment lid with the screws.
7. Press the 

ON/OFF

 key at the instrument.

The instrument is switched on and the TDR trace is displayed.

8. Open the main menu by pressing and holding the 

ESC

 key.

The main menu appears.

9. Navigate to the 

Settings

 submenu with the help of the 

 and 

 scroll keys.

Содержание M281A









































Отзывы:

Нет отзывов