Gossen MetraWatt 4000M, Руководство по эксплуатации

Страница: 6 / 16

6 GOSSEN-METRAWATT
1.5.1 Recording table for roll chart
(see figure 5 and figure 6)
1. Unlock the recording table: Press the unlocking lever Eh down-
wards (see figure 5). The recording table tilts to the front.
Remove the recording table.
2. Unfold the paper holddown device Pa .
3. Place the chart roll into the chart compartment Pm .
4. Pull the front end of the chart up to the pin platen and place
the perforation onto the pins of the platen. Make sure chart
and pin platen are in parallel!
5. Fold the paper holddown device Pa back.
6. Unfold the chart guide Pf .
7. Insert the take-up roll Ar
8. Fold the chart guide Pf back.
Note
When the recording table has been inserted into the recorder,
the chart automatically winds onto the take-up roll.
9. Swing the recording table into the chassis until it engages.
1.5.2 Recording table for fanfold chart
(see fig. 5, fig. 6 and fig. 7)
When changing the recording table for roll chart to fanfold chart,
remove the guide spring
Ff (see figure 6).
1. Unlock the recording table: Press the unlocking lever Eh down-
wards (see figure 5). The recording table tilts to the front.
Remove the recording table.
2. Unfold the paper holddown device Pa .
3. Place the fanfold pack into the chart compartment Pm .
4. Unfold the chart guide Pf .
5. Pull the front end of the chart up to the pin platen and place
the perforation onto the pins of the platen. Two folded layers
must rest on the bottom of the chart compartment. Make sure
chart and pin platen are in parallel!
6. Fold the paper holddown device Pa back.
7. Fold the chart guide Pf back.
8. Swing the recording table into the chassis until it engages.
1.6 Installing the fiber pen insert / print insert
1. Fold the scales up.
2. Install the fiber pen insert / print insert according to figure 8.
Figure 8 Installing the fiber pen insert / print insert
Figure 9 Display and control panel
It is easier to install the fiber pen inserts and the print insert when
the recorder is switched on.
1. Unlock the recording table: Press the unlocking lever Eh down-
wards (see figure 5). The recording table tilts to the front.
2. Remove the recording table.
3. Press <
▲
>. The measuring systems travel to the park position.
4. Fold the scales up.
5. Install the fiber pen inserts and the print insert.
6. Fold the scales down.
7. Press < >.
8. Swing the recording table into the chassis until it engages.