2
1
6
83
88
51
2
4
3
65
2
4
63
82
87
1
6
Step 1:
−
Place the base frame on a flat even floor.
−
Pull the front stand (2) out to the front.
−
Pull up the front tube (4).
−
From the front fix the front tube (4) to the front stand (2) using two bolts M10x55 (65)
−
From the side fix the front tube (4) to the base frame (1) with a bolt M10x110 (63), a washer M10 (82) and
a safety nut M10 (87)
Step 2:
−
Fix the cockpit holder (6) to the front end of the front tube (2).
−
To do this use a bolt M8x70 (51), a washer M8 (83) and a safety nut M8 (88).
Note
: Only tighten bolt (51) and safety nut (88) far enough so that the cockpit holder (6) can still be moved but
cannot slip and change position by itself.
Assembly