4
36
59
59
12
For the rowing machine to stand safely and securely, the front and rear stands are equipped with two adjustable
feet (59). With these it is possible to level out the device and compensate for any slight unevenness in the floor.
Screw all adjustable feet (59) as far as they will go into the two stands. Now all adjustable feet (59) are at the
same level to start from. Put the rowing machine in the desired location and check to see if it is stable and
standing securely on the floor. If it is slightly wobbly, unscrew the appropriate adjustable foot until the device
is stable. If the floor in the chosen location is so uneven that the wobbling cannot not be regulated using the
adjustable feet, then you must select another location which is much more even for your rowing machine.
This rowing machine is fitted with transport rollers (36) on the rear stand to make it easy for you to transport
it. To push the rowing machine into another location, lift the front stand far enough up until the transport rollers
are touching the floor. Now you can push or pull the device into the desired new location. Lower the rear stand
gently onto the floor.
Make sure when lifting, transporting and putting down the device that you have a secure footing and that you
hold onto it firmly.
Levelling the Device
Transport
