manualshive.com logo in svg

Gorilla Playsets Chateau Tower Treehouse with Fort Add On 1500AWFNS, Руководство по сборке, Страница: 122 / 146

Поделиться
Скачать
Gorilla Playsets Chateau Tower Treehouse with Fort Add On 1500AWFNS Скачать руководство пользователя страница 122

Some playsets have a Ladder, Rock Wall or Ramp here.  If any of these items are here then this kit has 

extra slats to fill up the sides of this opening.

Some playsets have a Tire Swing Beam 

attached here.

For those playsets the panel slat steps 

in this manual outline how to arrange 

the panel slats around where the Tire 

Swing Beam is attached.

Some playsets have a Tube Slide here along with a rear mounted Ladder.  If the playset has a Tube 

Slide here then this kit does not

 have extra slats to fill up the spaces between the existing slats.  

REAR OF

FORT

REAR OF

FORT

rear mounted Ladder

Plastic Sunburst 

(included with playset

NOT with 1531 kit)

Plastic Sunburst 

(included with playset

NOT with 1531 kit)

3

Содержание Chateau Tower Treehouse with Fort Add On 1500AWFNS



















































































































































Отзывы:

Нет отзывов