A
OF THE ROOF.
SUPPORT AT THE PEAK
ROOF SUPPORT
ROOF SUPPORT
TOP OF ROOF
EXAMPLE: 30-1/2" MINUS 23-5/8"
EQUALS 6-7/8". 6-7/8" DIVIDED BY
2 EQUALS 3-7/16" OVERHANG
PER SIDE.
23 " EXAMPLE DIMENSION
" ROOF STARTER LENGTH
DIM A
8
5
OVERHANG
30 12
DIM B
OVERHANG
TOGETHER AS POSSIBLE
#8 X 1-1/2"
ROOF STARTER
WITHOUT THE STARTERS
WOOD SCREW
DETAIL A
OVERLAPPING.
1 X 4 X 30-1/2"
PLACE AS CLOSE
ROOF SUPPORTS
STEP 57: UPPER LEVEL ROOF
1: PLACE THE 1 X 4 X 30-1/2" GROOVE-ONLY ROOF STARTER BOARDS AT THE PEAK OF THE ROOF. THE
HOLES IN THE ROOF STARTERS SHOULD BE APPROXIMATELY CENTERED (SEE BELOW) ON THE ROOF
SUPPORTS, AND THE FLAT ENDS OF THE ROOF STARTERS SHOULD BE PLACED AS CLOSE TO EACH OTHER AS
POSSIBLE WITHOUT THE BOARDS OVERLAPPING.
2: FASTEN THE ROOF STARTER BOARDS TO THE ROOF SUPPORTS WITH 1-1/2" WOOD SCREWS.
MEASURE DIM A ACROSS THE BOTTOM OF THE ROOF SUPPORTS NEAR THE CORNER POSTS. WHEN
ATTACHING THE ROOF STARTERS DIM B AT THE ROOF PEAK SHOULD MATCH DIM A. THIS WILL MAKE THE
ROOF SUPPORTS PARALLEL TO EACH OTHER. DUE TO WOOD MILLING VARIATIONS YOUR HOLES IN THE
ROOF STARTERS WILL EITHER BE CENTERED ON THE ROOF SUPPORTS OR THEY WILL BE OFFSET TOWARDS THE
INSIDE OF THE ROOF SUPPORTS SLIGHTLY. SUBTRACT DIM A FROM 30-1/2" AND THEN DIVIDE THIS NUMBER
BY 2. THIS WILL GIVE YOU THE OVERHANG FOR EACH SIDE. USE THE OVERHANG NUMBER ON EACH SIDE
TO KEEP YOUR ROOF SUPPORTS PARALLEL.
101
Содержание 1500GWF
