Gorenje WA71141, Инструкция по эксплуатации

Страница: 13 / 32

300526
• Push the START button (C). The ON/OFF LED stops fl ashing,
the machine starts operating after a few seconds. If the door
is not properly closed after starting the operation, the ON/OFF
LED starts
fl ashing again after a few seconds. When you close
the door, the machine initiates the selected program.
• In case you would like to alter the washing program after the
initiated washing operation, turn the program selector for one
second to the position “0”, followed by the selection of a new
program. Switching the machine off deletes any previously
selected additional functions (i.e. PUMP STOP)
, so they
have to be reactivated.
- End of operation
Flashing START/STOP LED indicates that the program was
completed.
• Extract the laundry from the drum and remove any alien
objects from the door gasket.
• Leave the door ajar to allow the interior to dry.
• Close the water inlet faucet.
• Switch the machine off by turning the program selector to
position “0”.
• Pull the power lead from the socket and cut the power supply
from the mains.
• By the user
Selecting Pump stop function
Program is stopped when it comes to the ‘PUMP STOP’
stage (if this function had been previously selected). Drum door
remains closed all the time. Indicator LED above the ‘Pump
stop’ function starts
fl ashing. Washing procedure is continued by
pressing the START knob (C).
Own (physical) interruption
You may also stop the program by turning the program selector
to the position “0”. If there is water in the drum select one of
additional programs (pumping
, spinning ) to empty the
water and terminate the program.
Pause knob
By pressing the PAUSE knob (C) program may be suspended
at any time. After certain time you may open the door if there is
no water in the drum, otherwise this is not possible. Program is
continued by pressing the START knob (C).
Start the operation
Interruptions
13