Gorenje WA71141, Инструкция по эксплуатации

Страница: 12 / 32

300526
To run the auto-clean program, rotate the program selector knob
(A) to the position “Cotton 95°C”, then pressing the (B) (pump
stop) key and hold it for three seconds.
If you do not regularly use washing program with temperatures
over 60°C, it is recommended to run the auto-clean program at
least once per month.
- Selection of partial programs ( , , , )
These are independent programs and may be used when you do
not need the entire washing program. In case you would like to
use more additional programs in a sequence, you must turn off
the appliance prior any new program selection (turn the program
selector (A) to “0” for at least one second).
Rinse
Independent program for rinsing delicate laundry, without
intermediate spinning and with short
fi nal spin. You may use it for
rinsing manually washed delicate laundry or for extra rinsing for
people with skin sensitive to detergents.
Softening
This program is intended for softening, bleaching or impregnating
of washed laundry. It is completed with spinning at max. 1000
RPM.
Pumping the water out
Use it when the washing program was interrupted or if pump stop
function was engaged, and you only wish to pump the water out
of the drum, without spinning.
Spinning
Aggressive spinning for non-delicate laundry at high spin RMP.
- Adding washing and softening agents
(see Tips for washing and energy saving)
• pre-wash compartment
• main wash compartment
• softener compartment
Washing detergent may be added directly into the drum, using
the measuring vessel.
When adding softener, be careful to fi ll the dispenser
only up to the marked level.
Be sure to close the detergent dispenser when
opening/closing the appliance door.
12