6
Soup program
This program is used for cooking soups and
porridges.
Cooking temperature inside the pot is set to 115-
120
°C.
Use the "Multifunction" key to select the "Soup"
program.
"F:" and a number will flash on the display. The
number indicates the cooking time which is preset
to 30 minutes. The cooking time can be adjusted if
necessary using the + and
– keys. After 30
seconds, cooking time will stop flashing and the
program will start.
Cooking time starts counting down when the
pressure in the cooker reaches the required level
and the floating valve is lifted into its upper
position. "Pressure" will appear on the display.
When cooking time expires, the appliance will
switch to "Warming" mode.
Braise program
This program is used for cooking braising.
Cooking temperature inside the pot is set to 115-
120°C.
Use the "Multifunction" key to select the
"Braise/Tendon" program.
"F:" and a number will flash on the display. The
number indicates the cooking time which is preset
to 30 minutes. The cooking time can be adjusted if
necessary using the + and
– keys. After 30
seconds, cooking time will stop flashing and the
program will start.
Cooking time starts counting down when the
pressure in the cooker reaches the required level
and the floating valve is lifted into its upper
position. "Pressure" will appear on the display.
When cooking time expires, the appliance will
switch to "Warming" mode.
Warming program
This program is used to warm up the food or to
keep it warm.
Press the Cancel/Warming key.
The appliance will heat up the food or maintain a
temperature between 60°C and 80°C.
To cancel the program, press the
"Cancel/Warming" key.
Program table
Programs
Original
pressure
cooking time
(min)
Time
settings
(min)
Pressure (kPa)
Fry
00:25
/
Lid open
Cake
00:30
1 - 90
50 - 60
Soup
00:30
1 - 90
50 - 60
Rice
00:10
1 - 90
50 - 60
Stew
00:20
1 - 90
50 - 60
Slow cook
02:00
1h - 9h
0
Steam
00:15
1 - 90
50 - 60
Sauté Brown
00:30
1 - 90
Lid open
Braise
00:30
1 - 90
50 - 60
Warming
/
/
0
Tip:
Clean the appliance immediately after use
(see chapter "Cleaning").
Power button
Power button tells you how much power the
machine used, since the machine plug it. Display
shows power consumption in kWh.
The readings are only approximate.
