Gorenje KAS**DCINV F, Руководство пользователя

Страница: 25 / 172

9
OPERATING INSTRUCTIONS
Airflow direction control
•
Adjust the air flow direction properly otherwise, it might
cause discomfort or cause uneven room temperatures.
•
Adjust the horizontal louver using the remote controller.
•
Adjust the vertical louver manually.
To set the vertical air flow (Up--Down) direction
Perform this function while the unit is in operation. Keep
pressing the AIR DIRECTION button on the remote controller
to move the louver to the desired direction. The readjusting
angle of the horizontal louver is 6 for each press.
To set the horizontal air flow direction (Left - Right)
Adjust the vertical louver manually using the lever on the left
or right side of the vertical louver arm (Depending on model).
For some models, the vertical louver can be adjusted by
remote controller. For detailed explanation refer to the remote
controller manual
.
WARNING
•
Before you manually set vertical louver disconnect power
supply.
•
The SWING and AIR DIRECITON button will be disabled
when the air conditioner is not in operation (including
when the TIMER ON is set).
•
Do not operate the air conditioner for long periods with
the air flow direction set downward in cooling or dry
mode. Otherwise, condensation may occur on the
surface of the horizontal louver causing moisture to drop
on to the floor or on furnishings.
•
Do not move the horizontal louver manually. Always use
remote controller
•
When the air conditioner is started immediately after it
was stopped, the horizontal louver might not move for
approximately 10 seconds.
•
Open angle of the horizontal louver should not be set too
small, as COOLING or HEATING performance may be
impaired due to too restricted air flow area.
•
Do not operate AC with closed horizontal louver.
•
When AC is connected to the power supply for the first
time (or after power failure) the horizontal louver may
generate a sound. This is normal operation!
•
Open angle of the horizontal louver should not be set too
small, as COOLING or HEATING performance may be
impaired due to too restricted air flow area.
NAVODILA ZA DELOVANJE