Gorenje KAS**DCINV F, Руководство пользователя

Страница: 23 / 172

7
OPERATING INSTRUCTIONS
Special functions.
Refrigerant leakage detection
In case that control electronics of an AC detects leakage of the refrigerant, error 'EC'
is presented on display and identification lights are blinking.
Louver angle memory function
In case that the user changes angle of horizontal louver with remote controller, this
new set angle is memorized. After restart of the AC the horizontal louver will be
positioned in memorized angle. Position of the horizontal louver will be changed in
case of power failure or repositioning of the louver with a remote controller.
SELF CLEAN function
This function is used after shut down of cooling operation to clean heat exchanger on
the indoor unit. It prevents building of mildew on indoor units heat exchanger and
with it bad smell coming from indoor unit after a long pause in operation. Function
needs to be started with a remote controller. When SELF CLEAN function is
activated all timer settings will be canceled
FOLLOW ME function
Remote controller has temperature sensor installed. When FOLLOW ME function is
activated the air conditioner controls temperature on the position of the remote
controller. There should be no obstacles between indoor unit and remote controller.
External influence on remote controller temperature sensor must be eliminated (direct
sunlight, other heat sources, ..).
CLEAN AIR function(on some models)
Improving the quality of indoor air is one of the purposes of an air conditioner. This air
conditioner is equipped with ionizer or Plasma Dust Collector(Depending on specific
configuration of the model). With the anions generated by Ionizer, the air circulation
of the air conditioner fills the room with refreshing, natural and healthy air. The
Plasma Dust Collector generates a high voltage ionization zone, through which the
air is converted to plasma. Inside the air most of the dust, smoke, and pollen particles
are captured by the electrostatic filter.
Anti-mildew function (Optional)
When turns off the unit on COOL, DRY, AUTO (Cool) mode, the air conditioner will
continue operating for about 7-10 minutes (depending on models) at LOW fan speed.
If turns off on HEAT mode, the unit will continue operating for about 30 seconds at
LOW fan speed. This will help to dry up the condensed water inside the evaporator,
and prevent the breeding of mildew. Under Anti-mildew operation, do not restart the
air conditioner until the unit is completely off.