Gorenje K52CLB, Подробная инструкция по применению

Страница: 23 / 28

EN 22
Gas connection plug
A
Connection EN ISO 228-1
B Non-metal gasket, thickness 2 mm
C
Hose plug for liquefied natural gas (depending on
the connection regulations in the respective
country)
D Connection EN 10226-1 / -2 depending on the
connection regulations in the respective country).
After connection, check the operation of the burners.
The flames have to burn with clearly visible blue and
green core. If the flame is unstable, increase the
minimum power as necessary. Explain to the user
how the burners operate and review the instruction
manual together.
After connecting the appliance, check the seal
on all joints.
MODIFYING THE BURNERS FOR USE
WITH A DIFFERENT TYPE OF GAS
−
Modifying the burners for use with a different type
of gas does not require removing the hob from the
countertop.
−
Before making the modifications, unplug the
appliance from the power mains and shut off the
gas supply valve.
−
Replace the existing nozzle for the nominal heat
load with suitable nozzles for the new type of gas
(see table).
−
When modifying the appliance for use with
liquefied natural gas, tighten the minimum heat
load regulation screw all the way to reach the
minimum heat load.
−
When modifying the appliance for use with natural
gas, undo the minimum heat load regulation screw
to reach the minimum heat load, but by no more
than 1.5 turns.
After modifying the appliance for use with a
different type of gas, replace the old sticker with gas
type information (on the rating plate) with the relevant
new sticker and test the functionality and sealing of
the appliance.
Make sure the electric conductors, thermostat
capillary, and thermo elements do not protrude into
the gas flow area.
Adjustment elements
−
Adjustment elements for minimum heat load of the
burners are accessible through the openings on
the control panel.
−
Remove the control knobs.
Cooking burner
Gas valve with a safety device
B Minimum heat input regulation screw
Copreci
Sabaf