Gorenje K52CLB, Подробная инструкция по применению

Страница: 20 / 28

EN 19
Removing and inserting the oven door glass
pane
(depending on the model)
Screw out the screws on the door left and right sides
and pull out the upper lath. You can pull out the glass
pane of door now.
Provide these steps in reverse order at
returning the glass pane back.
Repair or any warranty claim resulting from
incorrect connection or use of the appliance shall
not be covered by the warranty. In this case, the
user will cover the cost of repair.
INSTALLATION AND
CONNECTION INSTRUCTIONS
APPLIANCE PLACEMENT
(mm)
The walls or furniture adjacent to the appliance (floor,
rear kitchen wall, side walls) have to be temperature-
resistant to at least 90°C.
LEVELLING THE APPLIANCE AND
ADDITIONAL SUPPORT
(depending on the model)
ADJUSTING THE HEIGHT OF THE
COOKER
(depending on the model)
The height of the cooker is 900 mm. You can adjust
the height of the appliance from 850 to 940 mm.
1. Put the cooker on the floor with back side.
2. Unscrew the screws, see arrows.
Torx T20
3. Set the desired height.
4. Screw the screws back together.
The cooker must be installed horizontally!
Follow these steps:
1. Rotate the height adjustment screws (see figure
1) to adjust the height of the cooker to the correct
position.